TECHNICAL

  1. Home
  2. Technical
  3. Installers







Low Pressure Regulator, complete with manual change-over switch and pigtails.

 

Item Code: RE002

installer1

  • Flow capacity: 4 Kg/hour
  • Inlet pressure: 80 – 700 KPA
  • Set outlet pressure: 2,8 KPA
  • Nominal flow capacity: 3 Kg/hour
  • Regulator outlet thread: 3/8″ BSP
  • Pigtails: Reinforced hose rated at 2470 KPA meeting BS4089/1 specification.

 

Low Pressure Regulator, complete with mounting bracket and Pigtail.

RE040S

Item Code: RE040S

  • Flow capacity: 4 Kg/hour
  • Inlet pressure: 80 – 700 KPA
  • Set outlet pressure: 2,8 KPA
  • Nominal flow capacity: 4 Kg/hour
  • Regulator outlet thread: 3/8″ BSP
  • Pigtail: Re-inforced hose rated at 2470 KPA meeting BS4089/1 specification.

 


Low pressure 4 Kg/hour Single Stage regulator

Code: RE030S

re030s

  • Capacity: 4 Kg/hour
  • Inlet pressure: 20 – 700 KPA
  • Set outlet pressure: 2.8 KPA
  • Nominal Flow Capacity: 3 Kg/hour
  • Inlet thread: 1/4″ BSP
  • Outlet thread: 3/8″ BSP
  • For use on 1st and 2nd stage applications.

 




High Pressure 20 Kg/Hr Rego 401 Regulator

For high pressure on either liquid or vapour, reducing container pressure to a delivery of pressure

0 – 275 KPA. Capacity 21kg/h (1 000 000 BTU/h).

Item Code: RE606

re606

Designed for either

  • Outlet pressure range from 3
  • Can be used as first stage regulator to reduce pressure to 10psi
  • Inlet and outlet: ¼” NPT
  • Plug for pressure gauge
  • Maximum inlet pressure

 

 


High pressure 24 Kg/hour regulator (Marshall)

Code: RE1122

  • Capacity: 24 Kg/hour
  • Inlet pressure: 1723 KPA (250psig)
  • Set outlet pressure: 206 KPA (30psig)
  • Nominal Flow Capacity: 24 Kg/hour
  • Inlet thread: 1/4″ BSP
  • Outlet thread: 1/2″ BSP
  • For use on 1st stage applications.

 

 


Bullnose Regulator: 4Kg/hour
Item code: RE056
 REG
 Working Temperature: – 20C to 55C
Outlet Pressure: 2,8 kPa
Inlet pressure: 80 – 700 kPa
Capacity: 4 kg/hr

 

First Stage Automatic Changeover Regulator

Item Code: REHPA8

 

 

 

 

 

Regulator Mounting Brackets

Item Code: REG302

REG302E

 

 

 
 

 

Manual Change-over Valves for Regulators


Item Code: RE032 (Blue)30-RE032

  • For Inverted Flared Pigtails / Gas Hose
  • 1/4″ BSP Tapered thread outlet.

 

Valve Shut-off (Ball Valves) – Yellow Handle

Designed primarily to handle gasses e.g. bottled gasses, town gas and compressed air.

Certification by European Gas Committee available on request.

vab001-5

Materials:

  • Body    : Hot pressed brass nickel-plated
  • Ball      : Hot pressed brass chrome -plated
  • Seat     : PTFE
  • O-rings : Viton & NBR
  • Stem seal : PTFE
  • Handle     : Zinc plated/varnished steel.
  • Bore        : BSP parallel female.

Item code:

VAB001 – 1/4″ LPGas (Yellow Handle)
VAB002 – 3/8″ LPGas (Yellow Handle)
VAB003 – 1/2″ LPGas (Yellow Handle)
VAB004 – 3/4″ LPGas (Yellow Handle)
VAB005 – 1″ LPGas (Yellow Handle)
VAB006 – 1-1/4″ LPGas (Yellow Handle)
VAB007 – 2″ LPGas (Yellow Handle)
VAB008 – 1-1/2″ LPGas (Yellow Handle)
VAB009 – 3″ LPGas (Yellow Handle)

Valve Shut – Off (Ball Valves) – Butterfly Handle

Designed for industrial, pneumatic, domestic and hydraulic installations. Will handle hot water, gasoline, gas oil, gas, kerosine, some acids and so forth.

 Materials: 

  • Body : Hot pressed brass nickle plated
  • Ball      : Hot pressed brass chrome -plated
  • Seat     : PTFE
  • Stem    : Hot pressed brass
  • Stem seal : PTFE
  • Handle     : Zinc plated/varnished steel.
  • Bore        : BS 21 (ISO 7) taper

Item codes:

VAHB04 – 1/4″ LPGas (Butterfly Handle)
VAHB03 – 3/8″ LPGas (Butterfly Handle)
VAHB02 – 1/2″ LPGas (Butterfly Handle)

Vapour Manifolds

RHP022

(Image shows a 2×2 Vapour Manifold, ready for shipping) Comes complete with pigtails and shut-off valves for each side. Connected to the valve is a brass female bull-nose fitting.

Item code:

RHP022 – 2X2 Manifold (or double two)
RHP033 – 3×3 Manifold
RHP044 – 4×4 Manifold
RHP055 – 5×5 Manifold